VVG Rivdom TWO2, Original Instructions Manual

Page: 22 / 40

22
5. Use and handling of the battery tools
a.
Only recharge the batteries in charging devices approved by the
manufacturer. There is a risk of fire when using a charging device designed
for a specific battery type when it is used with other batteries.
b. In electric riveting machines, only use batteries that have been de-
signed for this type of use.
Using other battery types may lead to fire
and injuries.
c.
When not using the battery, keep it away from paper clips, coins,
keys, nails, screws and other small metallic object which may cause
the contacts to connect.
If the battery contacts short-circuit, it may lead
to burns or fire.
d.
Fluid may emerge from the battery if it is used incorrectly.
Avoid con-
tact with that fluid. In case of accidental contact with the body, rinse the area
with water. If the battery fluid comes in contact with the eyes, additionally
call for medical help. Emerging battery fluid can lead to burns and irritation
of the skin.
6. Service
a.
Only let qualified personnel repair your electric riveting machine
and use only original spare parts for that. This ensures the continuous
safety of the electric riveting machine.
7. Security advices for electric riveting machines
a.
Hold the electric riveting machine firmly with both hands when
working and keep standing steadily. The electric riveting machine can
be operated safer when using both hands.
b. Immediately turn off the electric riveting machine if the electric riv-
eting tool jams.
c. Be prepared for a high reacting torque which causes strong recoil.
The tool jams when the electric riveting machine is overloaded.
d. Hold the electric riveting machine tightly.
e.
Secure the work-piece that is to be riveted.
A work-piece is held more
securely by a clamping device or a bench vise than by hand.
f.
Make sure that the power switch is turned to the „Off“ position be-
fore inserting a battery. Holding your fingers close to the power switch
when carrying the electric riveting machine or inserting a battery while is
“On” may lead to accidents.
g.
Do not open the battery, as this leads to the risk of a short-circuit.
Keep the battery away from heat (e.g. permanent sun radiation) and from
fire due to risk of explosion.
h. If the battery is damaged or used in an inappropriate manner, vapors
may emerge from it.
Get some fresh air and call for medical help in case of
complaints. The vapors can lead to irritation of the respiratory tracts.
i.
If the battery is defective, fluid may emerge from it and coat adjacent
objects. Check the parts affected, clean them or replace them, if necessary.
j.
Use the battery only with your Rivdom electric riveting machine.
This
is the only way to prevent dangerous overload of the battery.
GB