manualshive.com logo in svg

VVDN T4MFCS Scaleout, User'S Manual Manual, Page: 24 / 37

Share
Download
VVDN T4MFCS Scaleout User'S Manual Manual Download Page 24

 

VVDN_T4MFCS_Scaleout_User_Manual                                      Rev. A0-03

 

24 

CONFIDENTIAL 

5

 

Configuration and compilation  

 

Compile u-boot for SD card 

5.1

1. Goto SDK 1.6 and run the command on the following path: 

 

home/root/sdk-path/build_t4240mfcs_release/tmp/work/t4240mfcs-fsl-
linux/u-boot/2014.01+fslgit-r0/git 
 
make ARCH=powerpc CROSS_COMPILE =/home/root/sdk-path/ 
build_t4240mfcs_release/tmp/sysroots/x86_64-linux/usr /bin/ppce6500-
fsl-linux/powerpc-fsl-linux- T4240MFCS_SDCARD 

 

2.

 

If build is successful then for  u-boot binary image goto the path: 

 

In home/root/sdk-path/build_t4240mfcs_release/tmp/work/t4240mfcs-fsl-
linux/u-boot/2014.01+fslgit-r0/git 
 
we will get the following binary on the above mentioned path: 

u-boot-with-spl-pbl.bin 

 
 
 

 

Build Linux Kernel and device tree 

5.2

Configure the Linux kernel with default setting: 

1.

 

Run the config command on Linux kernel. 

Enable the following for NVME and Rapid IO support in device by following command: 

 

Summary of Contents for T4MFCS Scaleout






































Reviews:

No comments