!
Place the Wrap eyewear flat on your desk facing your computer.
Note:
Do not move the eyewear while the gyro zeroing process is being performed.
!
Follow the on-screen instructions to zero the tracker’s gyros.
Once the gyros are zeroed, VR Manager will present you with its
Calibration
screen.
!
Press the “Begin Calibration” button.
Tip:
For the most accurate calibration, minimize earphone movement (or remove them) and position
your eyewear as close as possible to the position it will be in when used, upright and facing
your desktop computer monitor.
!
Rotate your eyewear fully through each of the three axes.
This process captures tracker data through its full range of movement. The indicator bars
will move while new data is being received and stop progressing when no additional new
data is received. The indicator bars will not fill completely – this is normal.
!
When the indicator bars stop moving, press the “Lock Calibration” button.
Pitch
Roll
Yaw
