15
and right directional arrows (< >) on the Controller. If an alternate audio
system is used, volume is provided through that system’s controls.
Note:
When you connect your STAR system a Windows based computer Windows will
detect a new USB audio system and automatically configure your computer to
output sound to the Wrap earphones.
"
To use an alternate audio system, select it from the “Playback” section of
the Windows “Sound” Control Panel.
Tracker
The Wrap Tracker is an optional use accessory and is not required for the
operation of the display module and other components.
"
Plug the Tracker into its port above and to the right of the right side display.
Prior to using the tracker it must be calibrated. Calibration is performed
using the VR Manager software, explained later in this User Guide.
Note:
Although the Tracker connector may look similar to a USB Mini-B connector, it is
not. This is a proprietary connector and connecting a USB device to the Tracker
port on the eyewear or connecting the Tracker to a USB connector may damage
these devices.
Step 2: Hardware Connections
Connecting the Camera
If your camera is not still connected from when the camera software was
installed, connect it now to an available USB port.
USB