05
VULTA
ACCESSORIES
CHARGING YOUR VULTA FLASHLIGHT
Important!
When charging via the Vulta FA-
CH1 Universal Charger, use only rechargeable
18650 batteries.
To charge your Vulta Blizzard FS-E45R or
FS-B73R flashlight, follow these steps:
1.
Use the appropriate charging cable to
connect the charging base to an available AC
or DC power source. When the charging base
is powered, the status LED will glow green,
blinking red approximately once every seven
seconds to indicate that it’s searching for a
flashlight to charge.
2.
Place the entire flashlight containing
rechargeable 18650 batteries into the
charging base, making sure the charging
contacts touch. The status LED will glow red
to indicate charging.
When charging is complete, the status
LED will glow green and the FA-CH1 will
automatically switch to trickle charging.
Trickle charging maintains the batteries’ full
charge without damaging the flashlight or the
batteries, allowing you to safely leave your
flashlight in the charging base after charging
is complete.
