Vulkan LOKRING HMRK-L, Instruction Manual

Page: 9 / 26

D
F
LOKRING HAND ASSEMBLY TOOL INSTRUCTION MANUAL | 07 VERSION 1.0
3.3 INSERTION
OF THE ASSEMBLY JAWS
Insert the suitable assembly jaws
as shown. Attention! Always insert
bolts from the proper side. If you
hold the tool as shown, insert the
left bolt from the front and the
right bolt from the rear.
3.4 HMRK-V AND MZ-V
Only type HMRK-V and MZ-V:
The angle of the holding arm (F)
can be adjusted in accordance with
installation conditions. By loosening
the fixing pawl (D) the holding
arm (F) can be set in three different
angles. Attention! Fixing pawl (D)
again be locked in place!
LOKRING TYPE 00
LOKTOOL MB
Place the tool on the tube
connection as shown.
Both rings of the LOKRING
connector are assembled
simultaneously.
3.5 ASSEMBLY OF LOKRING
CONNECTORS TYPE 00
>