Vulcan Push & Gear Trolley
8
2020-02-05, rev1a
Inspection and Maintenance
ATTENTION
The trolley must be inspected by the operator daily. If any
deficiencies are noted, stop using the trolley until it is repaired or
replaced.
Suggested Daily Inspection List
1
Check for cracks or distortions in the structural frame,
welds or mechanical components
2
Check for loose or missing fasteners or other components
3
Check if trolley rolls smoothly
4
Check for signs of heat damage or weld splatter
5
Check for excessive wear on load bearing parts like, but not
limited to the wheels, the suspension pin, the thread, etc.
6
Make sure the nameplate and the warning labels are
present and legible
ATTENTION
A qualified person must inspect regularly and in depth the
trolley and its components to ensure the equipment is safe for
use. These inspections may vary in frequency and detail
according to the intensity of the equipment use but must include
at least the daily inspection procedure.
The user is responsible for keeping dated records of all
periodic inspections and maintenance procedures as means of
continuously monitoring the condition of the equipment.
