Vulcan-Hart 126905, Service Manual Supplement

Page: 5 / 56

ER SERIES FRYER SERVICE MANUAL SUPPLEMENT - GENERAL
F24696 (May 2001) Page 5 of 56
SPECIFICATIONS
Electrical
Separate electrical connections are required for each section of the battery.
• 208VAC, 240VAC or 480VAC (3 phase, 60HZ) to power the heating elements.
• On 208VAC and 240VAC models, step down transformer(s) provide power for the fryer controls, basket lift(s)
if installed, and Kleenscreen filtering controls.
• On 480VAC models, a 120VAC connection is required for each fryer section.
• All models require a separate 120VAC connection for the pump motor.
NOTE: Pump motor for Kleenscreen filtering system draws 5.0 amps.
MODEL
KW
PER FRYER
SECTION
3
AMPS - EACH FRYER SECTION
(3 PHASE/ 60HZ)
1
PER LINE
RECOMMENDED
CIRCUIT
PROTECTION
2
208V 240V 480V 208V 240V 480V
ERD40F
14 39 34 17 50 45 25
17 47 41 20 60 50 30
ERD50F
14 39 34 17 50 45 25
17 47 41 20 60 50 30
21 58 51 25 80 70 35
ERD225F
14 39 34 17 50 45 25
17 47 41 20 60 50 30
21 58 51 25 80 70 35
ERD85F 24 67 58 29 90 80 40
ERC40F
14 39 34 17 50 45 25
17 47 41 20 60 50 30
ERC50F
14 39 34 17 50 45 25
17 47 41 20 60 50 30
21 58 51 25 80 70 35
ERC225F
14 39 34 17 50 45 25
17 47 41 20 60 50 30
21 58 51 25 80 70 35
ERC85F 24 67 58 29 90 80 40
NOTES: 1. Amperage values in the table are nominal. Tolerance is
+5/-10%.
2. Complied in accordance with National Electric Code,
ANSI/NFPA 70, latest edition.
3. 14kw is standard on all fryers except 85 lb. models which
are 24kw.