18.
If your blind requires further tension, pull the cord
through the hole in the bottom button until you feel the
blind has sufficient tension and tie a fresh knot.
17.
Cut and remove the elastic bands from the blind.
Test the tension by raising the blind, ensure it stays fully
raised when released. Ensure bottom bar is straight
by adjusting it from side to side.
19.
Re-attach the endcap covers by aligning the central
post with the central hole on the endcap. Push the
endcap cover in fully until a click is heard. Ensure the
blind is lowered before doing this to prevent catching
the fabric.
20.
Your blind is now fully installed and ready to use.
