Connection and Setup
Cable Installation
Before the installation and use, please read carefully the relevant content in “Warning
and Safety instructions”.
1.
Take out the TV from the wrapping package and put it in a drafty and flat place.
NOTE:
• When you plug or unplug the TV, computer or other equipments, you must make sure
that the AC power has been already shut down;
• When unplugging the power cable or signal cable, please hold the plug (the insulated
part), do not draw the body of the cable.
2. LAN:
Use a network cable to connect the interface and the broadband network
interface.
Sending the TV's digital audio signal to external audio
equipment via the Digital Audio Output port.
The monitoring signal output of the TV set can be used as the signal
source.
NOTE:
• AV OUT can output only TV/AV channels' audio/video signal.
:The output COMPONENT(YPbPr) terminal of DVD can be
connected with the COMPONENT(YPbPr) input port of the TV through AV cable.
Connect one end of the VGA cable with the VGA port on computer, connect the
other end of the VGA cable with the VGA port on the TV, and tighten the bolts
clockwise on the each end of VGA cable.
NOTE:
• VGA shares the audio input port with components.
• While connecting the 15-pin VGA, please do not insert the plug overexertedly, for
fear the pin might be broken.
The output AV terminal of DVD can be connected with the AV input port of the
TV through AV cable.
Used to connect the antenna or the cable TV network, and receive outdoor
antenna signals or closed circuit TV signals.
Used to connect USB devices, such as USB Disk,
wireless network card, etc.
USB 3 (3.0) is an ultra high speed blue USB3.0 interface, which can provide 5V and
1A output to drive external storage devices, and is compatible with USB2.0 and
USB1.1 external storage devices.
Support AV devices with an HDMI connector (such as
set top box,DVD player, digital TV set, etc.).HDMI is also called as high definition
multimedia
3. DIGITAL AUDIO OUT:
4. AV OUT:
5. COMPONENT(YPbPr)
6. PC:
7. AV IN:
8. ANT:
9. USB 1, USB 2, and USB 3:
12.
Connect the AC power cable with 100-240V AC power supply.
NOTE
：
• The range of power input for the TV is 100-240V~, 50/60Hz, do not connect the TV
power input port with the AC power out of the above range.
• Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch directly the metallic part of the cable.
• Before connecting to an external device, please firstly make sure that the TV set and
the external device have been turned off. When connecting, please make reference
to the interface name and the interface color to connect the signal cable.
• The unit has a built-in wireless network card, and can directly receive network signals
from wireless router through WIFI antenna.
11. SD:
SD card (Secure Digital Memory Card) insertion interface
interface, and it can transmit digital audio and video signal with one cable.
10. HDMI 1, HDMI 2, HDMI 3:
7
Summary of Contents for 43S6535
Page 2: ......
