A08 - 25.09.2015
VTQ WMS HD - V/G-Mount TX
3.4. Connectors
3. SDI IN
Via a BNC connector an SDI video signal (HD/SD-SDI) is fed to to the transmitter, which is then
wirelessly transmitted to the appropiate digital video receivers.
Connector:
BNC, female, 75 ohms
Standard:
ANSI / SMPTE 292M, SMPTE 259M
SDI signal level:
800mV (p-p) nominal ±10%
If the transmitter does not auto-detect a new video format after this has been changed,
please restart the transmitter.
If a video signal contains a lot of noise this produces huge data rates in the encoder. In
cases of extreme noise levels in the original video signal, the resulting data rate can
increase to such an amount that the remaining available data is insufficient to guarantee
a technically proper transmission of the image.
4. SDI OUT
The SDI signal (HD/SD-SDI, embedded Audio), which has been fed in via the video input, is
displayed here.
Connector:
BNC, female, 75 Ohm
Standard:
ANSI / SMPTE 292M, SMPTE 259M
SDI signal level:
800mV (p-p) nominal ±10%
5. Fan F/S
This dip-switch defines the speed of the internal fan.
S --> Slow
F --> Fast
15
3
4
5
3. Connectors and control elements
Connectors and control elements