manualshive.com logo in svg

VTL IT-85, Owner'S Manual, Page: 5 / 38

Share
Download
VTL IT-85 Owner'S Manual Download Page 5

 

IT-85 Integrated amplifier  
Owner’s Manual 
VTL 

ii

Care and Maintenance of your VTL IT-85............................................................................20 

Break in Period .................................................................................................................. 20 
Tube types.......................................................................................................................... 20 
Tube Life............................................................................................................................ 20 
Bias checking and Setting .................................................................................................. 21 
Top view and Bias Measurement points and Tube complement of the IT-85 amplifier.... 24 
Changing Tubes ................................................................................................................. 24 
Changing the Main and B+ Fuses ...................................................................................... 26 
Cleaning ............................................................................................................................. 27 
Troubleshooting ................................................................................................................. 27 

chapter 5..................................................................................................................................30 

Specifications ........................................................................................................................30 

Chapter 6.................................................................................................................................31 

Warranty ...............................................................................................................................31 

Appendix .................................................................................................................................33 

Warranty Registration ........................................................................................................ 33 
Service Notes ..................................................................................................................... 33 

Summary of Contents for IT-85







































Reviews:

No comments