Page 3
5.
In order to have the unit properly
aligned, stand unit upright on a
level surface. Gently rock unit
back and forth to realign and
level the unit.
TIGHTEN ALL
NUTS AND BOLTS WITH
WRENCHES AT THIS TIME.
Unit should now be properly
aligned and level. If unit is not
level at this time, repeat the
above steps before proceeding
to step 6.
7.
Lay unit on the floor. Align the holes on the
caster with the holes on the corner of the
bottom shelf. Use the hex screws
(see Screw table F) and tighten
the caster. Repeat the same
for the other three casters.
It is recommended you
place the locking casters
on either the right side
or left side of the unit
for safer and easier
movement of cart
through doorways, ect..
6.
Slide the back panel between the
middle and bottom shelf. The
bottom of the back panel
needs to hook onto the
bottom frame lip and
the top of the panel
needs to go in
between middle shelf
lip and the brackets.
The side panels
Assembly as same
as above steps.
8.
To secure the cabinet panel, use the machine screws (see screw
table N) to tighten the cabinet panels to the frame poles as shown.
There are three screws on each side.