
Page 2
1.
Lay front legs (labeled "O" and "X") on the floor with the brackets
facing upward and inward as illustrated. Note: legs,when placed
on the floor should bend upward, off the floor at their top end and
the width of the unit should remain constant all the way to the top.
To
p
B
ot
to
m
Leg"O"
Leg"X"
2.
Slide each shelf over the brackets of the legs. The larger and without
holes shelf is the bottom. The top shelf has the
VTI
decal on it.
3.
Slide the two remaining legs onto the shelves as illustrated. Make
sure that the brackets are inside the shelves.
4.
HAND TIGHTEN
the top, middle and
bottom shelves at
the two corners with
square head bolt,
washer and nut
(screw table I) as
illustrated. Please
make sure washer
and nut are together
on the inside of the
leg bracket.
Leg "X"
Leg "O"
Top Middle
Bottom
Bac
k o
f sh
elf
Front of shelf
Leg"O"
Leg"X"