Page 3
7.
Hand-tighten the upper
pole (with holes) to the
lower poles.
Upper pole
Lower pole
5.
In order to have the unit properly
aligned, stand unit upright on a
level surface. Gently rock unit
back and forth to realign and
level the unit.
TIGHTEN ALL
NUTS AND BOLTS WITH
WRENCHES AT THIS TIME.
Unit should now be properly
aligned and level. If unit is not
level at this time, repeat the
above steps before proceeding
to step 6.
8.
Insert the two support
poles onto the top and
middle shelves as shown.
6.
Lay unit on the floor. Align the holes on the casters with
the holes on the corner of the bottom shelf. Use
the hex screws (see Screw
table F) and tighten
the caster. Repeat
the same for the
other three casters.
It is recommended
you place the locking
casters on either the
right side or left side of
the unit for safer and
easier movement of cart
through doorways, ect..
