To
p
B
ot
to
m
Leg"O"
Leg"X"
1.
Lay front legs (labeled "O" and "X") on the floor with the brackets
facing upward and inward as illustrated.
Note:
legs,when placed
on the floor should bend upward, off the floor at their top end and
the width of the unit should remain constant all the way to the top.
2.
Slide each shelf over the brackets of the legs. The largest shelf is
the bottom. The top shelf has the
VTI
decal on it.
3.
Slide the two remaining legs onto the shelves as illustrated. Make
sure that the brackets are inside the shelves.
4.
HAND TIGHTEN
the top, middle and bottom shelves at the two
corners with square head bolt, washer and nut (see screw table I)
as illustrated. Please make sure washer and nut are together on
the inside of the leg bracket.
Page 2
Leg "X"
Leg "O"
Top
Middle
Bottom
Leg"O"
Leg"X"
Ba
ck
of
sh
elf
Front of shelf
