BT Verve 450 – Edition 4 – 14.05.07.07 – 8179
If you experience any problems, please call the Helpline on
0870 240 3962
or email
Answer and Record
The pre-set Answer and Record
outgoing message, that allows your
caller to leave a message, is “Hello,
your call cannot be taken at the
moment, so please leave your message
after the tone”.
Your Answer and Record outgoing
message can be up to 1 minute long
and will replace the pre-recorded
message.
Answer Only
The pre-set Answer Only outgoing
message, where callers hear an
announcement but cannot leave a
message, is “Hello, your call cannot be
taken at the moment and you cannot
leave a message, so please call later”.
When recording your Answer Only
message, remember to advise your
caller that they will not be able to
leave a message.
Your own Answer Only message can be
up to 1 minute long and will replace
the pre-recorded message.
To reinstate the pre-recorded
messages, delete your own recorded
outgoing message, see opposite.
Outgoing messages
The outgoing message is the message a caller first hears when
the answering machine picks up their call. There are 2 pre-
recorded outgoing messages to choose from (see note left) or
you can record your own.
Record your own outgoing message
1. Press
Menu
. Scroll to
Answer machine
. Press
OK
.
2. Scroll to
Outgoing msg
and press
OK
.
3.
Record message
is highlighted. Press
OK
.
4. Scroll to
Ans & Rec
or
Answer only
and press
OK
.
5. Speak your announcement after the long beep. Press
Save
to
stop recording.
6. Your message is then played back. If you want to delete it,
press
Delete
during playback. Or press
OK
to save.
Check or delete your outgoing message
1. Press
Menu
. Scroll to
Answer machine
. Press
OK
.
2. Scroll
to
Outgoing msg
and press
OK
.
3. Scroll to
Play message
. Press
OK
.
Answering machine
8179 Verve 450 UG [4] 14/5/07 16:06 Page 45
37
