7
6
Setup
1
. Itad On/Off
2
. Record
3
. Erase
4
. Repeat
5
. Spare Battery Indicator
6
. Charging Contacts
7
. Handset Charging Indicator
8
. Mailboxes
9
. Headset Key
10
. Flash
11.
LCD Display
12
. Scroll Keys
13
. Volume Keys
14
. Intercom
15
. Select/Clear
16
. Skip
17
. Dialing Keys (0-9, , #)
18
. LINE 1/LINE 2 Keys
19
. Speakerphone Key
20
. Mute
21
. Data Jack
22
. Line 2 Jack
23
. LINE 1/LINE 1 + LINE 2 Jack
24
. Headset Jack
25
. Spare Battery Drawer
26
. DC Connector
27
. Spare Battery Release
The Base Unit Layout
Getting Started
To AC outlet
To telephone
jack
To telephone
socket outlet
AC adapter
8L55
!
+
20
10
22
25
24
26
8L55
!
+
23
21
27
1
17
18
19
2
3
9
13
12
6
8
4
7
14
15
11
5
16
*
Plug the AC power adapter into an electrical outlet, and the DC connector into
the back of the base unit.
Connecting to the telephone lines
Your 2-Line GIGAPHONE will work fine even if you only have one telephone
line. We recommend connecting the modular telephone cord to the jack
labeled LINE 1 / L1 + L2, located on the bottom of the Base Unit. Here are
steps for connecting 2 lines:
If you have 2 Lines coming out of a Single Wall Jack:
Connect a 4-wire (RJ-14) modular phone cord between the wall jack and the
phone jack labeled L1 / L1 + L2.
If you have 2 Lines, each coming out of Separate Wall Jacks:
Connect a modular phone cord from the wall jack you want to designate as
your LINE 1, to the LINE 1 / L1 + L2 jack on the bottom of the Base Unit.
Next, connect a phone cord from the remaining wall jack to the LINE 2 jack on
the Base Unit.
Data Port
Your 2-Line GIGAPHONE has a Data Port on the back of the Base Unit. This
port provides an easy way to connect your fax machine, laptop computer,
modem or other telephone device for direct access to LINE 2.
The Data Port only provides access to Line 2, so you must have an active line
connected to the LINE 2 jack on the bottom of the Base Unit. Connect a
modular phone cord from the Data Port (look for the small door marked
DATA
on the back of the Base Unit) to your fax, laptop, etc.
NOTE:
While the Data Port is in use, accidental use of Line 2 by a parallel
phone, your 20-2481, or a Call Waiting ID alert may interrupt the data
transmission.
RJ-11
One line
cord
RJ-14
2 line
cord
Examples of 1-Line and 2-Line Cords
