background image

Setup

Registration And Operation Of The VTECH VT20-2420

Accessory Handset

Your VTECH 2-Line GIGAPHONE system can operate up to 8 Handsets.
The VTECH accessory Handset consists of the following:

Getting Started

4

5

Follow the steps below:

1.

Remove the battery cover by pressing
on the indent and sliding downward.

2.

Place the new battery pack in the
handset with the metal contacts
aligned with the charge contacts in
the battery compartment.

3.

Replace the battery cover by sliding
it upwards.

4.

If the new battery pack is not already
charged, place the handset in the
base unit, or a remote charging
stand, and allow it to charge for 12
hours.  After initial charge, a
maintenance charge of 8 hours
should be sufficient.

Installation of Battery Pack in Handset

The original Handset that is shipped with you 2-Line GIGAPHONE system will be
automatically registered to the Base. This Handset is HANDSET 1.

As you register additional Handsets to the system, they will be assigned extension
numbers in the following order: HANDSET 2HANDSET 3HANDSET 4, and so forth.

Whenever a Handset battery pack is installed, the Handset will automatically begin
SEARCHING FOR  BASE  (if previously registered), or it will prompt you to ENTER
BASE ID
 to register the new Handset.

 BEFORE USING YOUR HANDSET(S), CAREFULLY PEEL OFF THE PROTECTIVE
 FILM, COVERING THE DISPLAY.

Setup Of The VT20-2420

Accessory Handset

1.

Plug the AC power adapter into an
electrical outlet.

2.

Remove the Handset battery cover
by pressing on the indent and sliding
downward.

3.

Place the new battery pack in the
Handset, with the metal contacts
aligned with the charge contacts in
the battery compartment.

4.

Replace the battery cover by sliding
it upward.

5.

Place the Handset in the Charge
Cradle, and allow it to charge for 12
hours.  After the initial charge, a
maintenance charge of 8 hours
should be sufficient.

Handset

Battery Pack

Charger Unit

Belt Clip

FLASH

FLASH

CLEAR

HANDSFREE

VOLUME

INTERCOM/

GIGA

PHONE

2.4GHz

TRANSFER

L1

1

2

ABC

DEF

MNO

JKL

TUV

GHI

PQRS

TONE

WXYZ

3

6

5

4

7

8

9

#

OPER

0

*

L2

OFF

1

5

3

FLASH

FLASH

CLEAR

HANDSFREE

VOLUME

INTERCOM/

GIGA

PHONE

2.4GHz

TRANSFER

L1

1

2

ABC

DEF

MNO

JKL

TUV

GHI

PQRS

TONE

WXYZ

3

6

5

4

7

8

9

#

OPER

0

*

L2

OFF

1

3

2

Summary of Contents for VT20-2420














Reviews: