background image

1

Handset Icons

Icon

Description

Line In Use indicator
On steady with no number next to it when a parallel set is in use.
On steady with one or more numbers next to it, indicating which
extensions are using the line.  For example,        12 indicates that
Handset 1 and Handset 2 are on an outside call using Line 1.

Intercom indicator
On steady with the extension numbers currently on an intercom call.
For example,     02 indicates that the Base and Handset 2 are on an
intercom call.

Battery indicator
Cycles (Low, Medium, and High) when Handset battery is charging.
Flashes when a low battery condition is detected.

Mute indicator
On steady when the Handset microphone is muted.

Hold indicator
On steady when the line is on hold.

Handset Registration indicator
On steady when a Handset is not registered, or is searching for a Base
unit.

M

H

R

Handset Indicators

Handset LEDs

LED

Message
Waiting

Description

Lights to indicate that you have new messages in your voicemail.
Service must be subscribed to through your local telephone
company.

Blinks slowly to alert you to new messages stored in your VT20-
2481 2-Line Answering System.

Handset Operation

8

9

Your GIGAPHONE 2-Line cordless Handset is equipped with a 2.5mm Headset Jack
for use with an optional accessory Headset for hands-free operation.  If you choose
to use the Headset option, you must obtain an optional accessory Headset, which is
compatible with the GIGAPHONE.
To purchase a Headset, call VTECH Customer Service at 1-800-595-9511.

Once you have a compatible 2.5mm Headset, locate the Headset Jack on the
GIGAPHONE Handset. Connect the plug on the Headset cord to the jack on the cordless
Handset. The plug should fit securely. Do not force the connection.

Operation

NOTE :
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be muted.
This is done to limit the effect of background
noise.

Many compatible Headsets have a reversible,
monaural design. You can wear your
Headset on either ear, leaving one ear free
for room conversation.

Belt Clip

The GIGAPHONE is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the clip with the notches on
the sides of the GIGAPHONE Handset.
The belt clip should snap securely into
place. Do not force the connection.

Headset Operation

Additional Information

2

1

FLASH

FLASH

CLEAR

HANDSFREE

VOLUME

INTERCOM/

GIGA

PHONE

2.4GHz

TRANSFER

L1

1

2

ABC

DEF

MNO

JKL

TUV

GHI

PQRS

TONE

WXYZ

3

6

5

4

7

8

9

#

OPER

0

*

L2

OFF

      E

Enhanced Mode indicator
On steady when active Handset is in Enhanced mode.

Summary of Contents for VT20-2420














Reviews: