31
You Hear Noise In The Handset, And None Of The Keys Or Buttons Work
Make sure the power cord is plugged in.
The ANSWER ON/OFF Button is Blinking
If
the button slowly flickers on and off, you need to reset the day and time. See
Answering System Setup
- Checking and Setting Day and Time
for details.
If the button slowly flashes, it indicates the answering system is in
Announce
Only
mode. See
Answering System Setup
-
Set Announce Only
for details.
Common Cure For Electronic Equipment
If the unit does not seem to be responding normally, then try putting the Handset in the
cradle. If it does not seem to respond, do the following(in the order listed) :
1. Disconnect the power to the Base.
2. Disconnect the Handset battery.
3. Wait a few minutes.
4. Connect power to the Base.
5. Re-install the battery pack, and return the Handset to the charge cradle.
6. After a few seconds, try using your Handset again.
In Case Of Difficulty
If you still hear other calls, the problem is probably in your wiring or local service.
Call your local telephone company.
Additional Infor
mation
