Introducing the VSP725
16
Back to Contents
VSP725 Administrator and Provisioning Manual
VSP725 Configuration Methods
You can configure the VSP725 using one of the following methods:
From the VSP725 itself, using the menus. The VSP725 menus are best suited to
configuring a few settings, perhaps after the initial setup has been done. For
administrators, the settings available on the VSP725 menus include network
settings, account settings, and provisioning settings. See
“Using the Admin
Settings Menu” on page 26
. Most of the settings accessible on the VSP725are
most useful for end users. Through the menu, they can customize the screen
appearance, sounds, and manage calls. For more information, see the VSP725
User Guide.
The Web User Interface, or WebUI, which you access using your Internet browser.
See
“Using the WebUI” on page 32
. The browser-based interface is easy to
navigate and best-suited to configuring a large number of VSP725 settings at once.
The WebUI gives you access to every setting required for configuring a single
device. You can enter service provider account settings on the WebUI, configure
the programmable keys, and set up provisioning, which will allow you to
automatically and remotely update the VSP725 after initial configuration.
Provisioning using configuration files. Working with configuration files is the best
way to configure multiple phones. There are several methods available to enable
the VSP725 to locate and upload the configuration file. For example, you can
enable the VSP725, when it starts up or reboots, to check for the presence of a
configuration file on a provisioning server. If the configuration file is new or has
been modified in any way, the VSP725 automatically downloads the file and
applies the new settings. For more information, see
“Provisioning Using
Configuration Files” on page 87
.
