VTech VS112-2 User Manual Download Page 45

Page: 45 / 84

• Press

to stop the playback.

To listen to messages at the handset

1. Press

MENU/SELECT

on the handset

in idle mode.

2. Press

MENU/SELECT

again to select

Play messages

. If you have either

new or old messages, the messages
play automatically.

3. The system announces the number

of messages, then begins playback.
The message sequence is shown on
the handset’s screen.

4. Press

to stop the playback.

Options during playback

• Press

to play the messages

through the handset earpiece.

• Press

again to return to

playing messages through the
speakerphone.

• Press

/VOLUME/

to adjust the

message playback volume.

• Press

to skip to the next message.

• Press

to repeat the message

currently playing. Press

twice to

listen to the previous message.

• Press

MUTE/DELETE

to delete

the current message.

• Press

to stop the playback.

Delete all messages

Using the base

1. Press

in idle mode. The

telephone announces,

“To delete all

old messages, press

DELETE

again.”

2. Press

again. All previously

reviewed messages are erased and
the telephone announces,

“All old

messages deleted.”

Using a handset

1. Press

MENU/SELECT

in idle mode.

2. Press

to highlight

Answering

sys

, then press

MENU/SELECT

3. Press

to highlight

Delete all

old

, then press

MENU/SELECT

4. Press

MENU/SELECT

to confirm. The

handset displays

Deleting...

, then

No old messages and then returns
to the previous menu. You hear a
confirmation tone.

Answering system remote access

You can reach your answering system
remotely by dialing your home
telephone number from any touch-
tone telephone.

1. Dial your telephone number from

any touch-tone telephone.

2. Once the system plays your

announcement, enter the two-digit

Summary of Contents for VS112-2





















































































Search results

Summary of Contents for VS112-2

Reviews:

Related manuals for VS112-2

Brands by name

Popular brands

VTech VS112-2, User Manual

Search results

Summary of Contents for VS112-2

Reviews:

Related manuals for VS112-2

Brands by name

Popular brands