VTech VS112-2 User Manual Download Page 21

Page: 21 / 84

FIND

HANDSET

• Press the button to page

all system handsets.

Handset

Visual ringer indicator

MENU/

SELECT

• Press to display the

menu.

• Once in the menu, press

to select an item or save
an entry or setting.

•

VOLUME

• Press to show

phonebook entries
when the telephone is
not in use.

• Press to scroll up while

in a menu.

• Press to increase the

listening volume when
on a call, or increase
the message playback
volume.

• While entering names

or numbers, press to
move the cursor to the
right.

• VOLUME

CID

• Press to review the

caller ID log when the
telephone is not in
use.

• Press to scroll down

while in a menu.

• Press to decrease the

listening volume when
on a call, or decrease
the message playback
volume.

• While entering names

or numbers, press to
move the cursor to the
left.

• During a call, press to

hang up.

• While in a menu, press

to cancel an operation,
back up to the previous
menu, or exit the menu
display; or press and
hold this button to exit
to idle mode.

• When the handset is

ringing, press to mute
the ringer temporarily.

• Press and hold while

the handset is not in use
to erase the missed call
indicator.

Summary of Contents for VS112-2





















































































Search results

Summary of Contents for VS112-2

Reviews:

VTech VS112-2, User Manual, Page: 21 / 84

Search results

Summary of Contents for VS112-2

Reviews: