Using the WebUI
50
Back to Contents
VCS754 Administrator and Provisioning Manual
LLDP-MED
802.1x
Priority
Select the VLAN priority that matches the Quality of
Service (QOS) settings that you have set for that VLAN ID.
Outbound SIP packets will be marked and sent according
to their priority. 7 is the highest priority.
NOTE
: Configuring
QOS settings for your router or switch is a subject outside
the scope of this document.
Setting
Description
Enable LLDP-MED
Enables or disables Link Layer Discovery Protocol for
Media Endpoint Devices (LLDP-MED). LLDP-MED is a
standards-based discovery protocol supported on some
network switches. It is required for auto-configuration with
VLAN settings.
Packet Interval (secs)
Sets the LLDP-MED packet interval (in seconds).
Setting
Description
Enable 802.1x
Enables or disables the 802.1x authentication protocol.
This protocol allows the phone to attach itself to network
equipment that requires device authentication via 802.1x.
Identity
Enter the 802.1x EAPOL identity.
MD5 Password
Enter the 802.1x EAPOL MD5 password.
Setting
Description
