background image

!!

Warranty Statement

What does this limited warranty cover?

•          The manufacturer of this VTech product, VTech Communications, warants

to the holder of a valid proof of purchase (“Consumer” or “you”) that the product
and all accessories provided by VTech in the sales package (“Product”) are free
from material defects in material and workmanship, pursuant to the following
terms and conditions, when installed and used normally and in accordance
with operation instructions, This limited warranty extends only to the Consumer
for Products purchased and used in the United States of America.

What will VTech Communications do if the Product is not free from
material defects in materials and workmanship during the limited
warranty period (“Materially Defective Product”)?

•         During the limited warranty period, VTech’s authorized service representative

will repair ot replace at VTech’s option, without charge, a Materially Defective
Product. If we repair this product, we may use new or refurbished replacement
parts. If we choose to replace this product, we may replace it with a new or
refurbished  product of the same or similar design. VTech will return repaired
or replacement products to you in working condition. VTech will retain
defective parts, modules, or equipment. Repair or replacement of
Product, at VTe c h ’s    option, is your exclusive remedy. You should expect the
repair or replacement to take approximately 30 days.

How long is the limited warranty period?

•         The limited warranty period for the product extends for ONE(1) YEAR from

the date of purchase if we repair or replace a Materially Defective Product
under the terms of this limited warranty. This limited warranty also applies to
repaired or replacement Products for a period of either (a) 90 days from the
date the repaired or replacement Product is shipped to you or (b) the time
remaining on the original one-year warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover
1.

  Product that has been subjected to misuse, accident, shipping or other physical

damage, improper installation, abnormal operation or handling, neglect,
inundation, fire, water or other liquid intrusion; or

2.       Product that has been damaged due to repair, alteration or modification by

anyone other than an authorized service representative of VTech; or

3.     Product to the extent that the problem experienced is caused by signal

conditions, network reliability or cable or antenna systems; or

4.      Product to the extent that the problem is caused by use with non-VTech

electrical accessories; or

5.        Product whose warranty/quality stickers, Product serial numbers plates

or electronic   serial numbers have been removed, altered or rendered illegible;or

6.     Product purchased, used, serviced, or shipped for repair from outside the

United States, or used for commercial or institutional purposes (including but

Additional Information

Summary of Contents for v 2651






















































Reviews: