VTech TR1-2013 User Manual Download Page 7

Page: 7 / 84

Getting started

Place the battery with the label

THIS SIDE UP

facing up and

the wires inside the battery

compartment.

Plug the battery connector securely

into the socket, matching the

orientation of the engraved label.

Slide the battery compartment cover

towards the center of the handset

until it clicks into place.

Place the handset in the telephone

base or charger to charge.

Battery installation

Install the battery as shown below.

If the handset will not be used for a long period of time, disconnect and remove the

battery to prevent any possible leakage.
To purchase replacement batteries, visit our website at

www.vtechphones.com

or call

1 (800) 595-9511

. In Canada, go to

www.vtechcanada.com

call

1 (800) 267-7377

•

IMPORTANT:

Check for a dial tone by pressing . If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service to

digital service from a cable company or a VoIP service provider, the telephone line

may need to be rewired to allow all existing telephone jacks to work. Contact your

cable/VoIP service provider for more information.

•
•

Charger

adapter

CHARGE

light

remains on

when charging.

Batter

ck / Bloc

-piles

(2.4V Ni-MH

)

RNING /

ERTISSEMENT

DO NO

T BURN OR PUNC

TERIES

NE P

AS INCINÉRER OU PERCER LES PILES.

Made in China /

briqué en chine

/ C

CÔ

TÉ

CR1232

Batter

y P

ack / Bloc

-piles

(2.4V Ni-MH)

RNING / A

VERTISSEMENT

DO NO

T BURN OR PUNC

TERIES.

S INCINÉRER OU PERCER LES PILES.

Made in China / F

abriqué en chine

/ C

CÔ

TÉ

CR1232

Summary of Contents for TR1-2013





















































































Search results

Summary of Contents for TR1-2013

Reviews:

Related manuals for TR1-2013

Brands by name

Popular brands

VTech TR1-2013, User Manual

Search results

Summary of Contents for TR1-2013

Reviews:

Related manuals for TR1-2013

Brands by name

Popular brands