VTech t2350 User Manual Download Page 32

Page: 32 / 49

www.vtechphones.com

32 BASIC OPERATION

Battery Care and Maintenance

After your battery is fully charged, you can expect the following performance:

Operation

Operating time

While in use (talking)

up to 4 hours

While not in use (standby*)

up to 4 days

* Handset is off the base unit or charger but not in use

• The battery needs charging when:
— A new battery is installed in the handset

— The phone beeps twice every five seconds.

— The screen displays

BATTERY LOW

and the low battery icon

• Place the handset in the base The battery is typically fully charged at least 16 hours
• You can keep the battery fully charged by returning the handset to the base after each use

Replacing the Handset Battery

1 Remove the battery compartment cover on the handset by pressing on the

indentation and sliding the cover downward

2 Lift out the old battery and disconnect

3 Align the two holes in the new battery’s plug with the socket pins, and snap

the plug into place Snap the battery in the compartment, as described in

Installation

, on page 4

4 Replace the cover by sliding it up into place

5 The new battery must be charged before using the phone Place the handset

in the base and allow it to charge for at least 16 hours the first charge. The

telephone might operate before that, but for best performance, let the battery

charge fully

Batteries

• If you repeatedly

get a low battery

indicator, even after

charging overnight,

the battery should be

replaced

• To reduce the risk

of fire or injury to

persons or damage

to the telephone,

charge the battery

provided with or

identified for use

with this product only

in accordance with

the instructions and

limitations specified

in the user`s manual

• Battery power is

consumed whenever

the handset is off the

base unit, even with

the handset is not in

use

• Once the battery

is fully charged,

you do not have to

charge it again until

BATTERY LOW

displayed or

flashes. This will

maximize the battery

life

“CLICK”

Summary of Contents for t2350


















































Search results

Summary of Contents for t2350

Reviews:

Brands by name

Popular brands

VTech t2350, User Manual

Search results

Summary of Contents for t2350

Reviews:

Brands by name

Popular brands