VTech Pop-A-Ball Pop & Drop Digger, Parents' Manual

Page: 10 / 13

9
CARE & MAINTENANCE
1. Keep the digger clean by wiping it with a slightly damp cloth.
2. Keep the digger out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the digger will not be in use for an
extended period of time.
4. Do not drop the digger onto hard surfaces and do not expose the
digger to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the digger
OFF
.
2. Interrupt the power supply by removing the batteries.
3. Let the digger sit for a few minutes, then replace the batteries.
4. Turn the digger
ON
. The digger should now be ready to play with again.
5. If the digger still does not work, replace the batteries with a brand
new set.
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or +44 1235 546810 (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech ® products is accompanied by a
responsibility that we at
VTech ®
take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department on
01235 546810 (from UK) or +44 1235 546 810 (outside UK), with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.