background image

14

Troubleshooting

5.

TROUBLESHOOTING

If you have difficulty with your phone, please try the suggestions listed below. Please also check the user's manuals of 

VTech LS6245

 for more 

detailed troubleshooting items.

Problem

Solutions

My telephone does not work at all.

•  Make sure the battery pack is installed and charged correctly. For optimum daily performance, 

return the handset to the telephone base or charger after use.

•  Make sure the power adapter is securely plugged into an outlet not controlled by a wall switch.
•  Make sure the telephone line cord is plugged firmly into the telephone base and the telephone 

wall jack.

•  Unplug the electrical power to the telephone base. Wait for approximately 15 seconds, then 

plug it back in. Allow up to one minute for the handset and telephone base to synchronize.

•  Charge the battery in the handset for up to 16 hours. 

If the battery is completely depleted, it can take up to 10 minutes to charge the handset before 
HANDSET X appears on the screen.

•  Remove and re-insert the battery pack. If that still does not work, it might be necessary to 

purchase a new battery pack.

•  Disconnect the telephone base from the telephone wall jack and plug in a working telephone. 

If the other telephone does not work, the problem is probably in the wiring or the telephone 
service. Call your telephone service provider.

Low battery shows on screen.

•  Place the handset in the telephone base or charger for recharging.
•  Remove and re-install the battery pack and use it until fully depleted, then recharge the 

handset in the telephone base or charger for up to 16 hours.

•  If the above measures do not correct the problem, replace the battery pack.

The battery does not charge in the 
handset or the handset battery does 
not accept charge.

•  Make sure the handset is placed in the telephone base or charger correctly. The charge light 

on the handset should be on.

•  Remove and reinstall the battery pack, then charge for up to 16 hours. 

If the handset is in the telephone base or charger but the charge light on the handset is not on, 
refer to 

The CHARGE light is off

 in this section.

•  If the battery is completely depleted, it can take up to 10 minutes to charge the handset before 

HANDSET X appears on the screen.

•  Purchase a new battery pack. 

Summary of Contents for LS6204 - Cordless Extension Handset





















Reviews: