26
Insert the camera into the waterproof case
• Make sure there is no wrist strap attached to the camera to avoid a
water leak and subsequent damage to the camera.
• Be sure you have inspected the o-ring (refer to the later section for
details about inspecting the o-ring) and checked for water leaks
before inserting the camera into the case.
• rotate the camera lens to the direction you would like to use before
inserting the
Kidizoom
®
Action Cam 180° into the waterproof case.
• open the case cover by pulling the buckle handle outwards as
indicated by the direction of the arrow icon below. After the handle is
loosened, the buckle can be opened.
• When the waterproof case is opened, insert the camera, taking note
of the position of the buttons. As a point of reference, the Memory
Card Slot will be on the same side as the buckle on the waterproof
case.
• Close the case cover and the buckle to hold the cover in position.
Push the buckle handle towards the case body to tighten the buckle.
• The camera is now ready for underwater use (up to 6 feet).
A
CCESSORIES