manualshive.com logo in svg

VTech DS6642-4, User Manual, Page: 7 / 101

Share
Download
VTech DS6642-4 User Manual Download Page 7

Getting started

3

Handset battery installation

If the handset will not be used for a long time, disconnect and remove the battery to 
prevent possible leakage.
To purchase replacement batteries, visit our website at www.vtechcanada.com or 
call 1 (800) 267-7377.

•

•

IMPORTANT:

Check for a dial tone by pressing 

/HOME

. If you hear a dial tone, the installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service to digital service from 
a cable company or a VoIP service provider, the telephone line may need to be rewired to 
allow all existing telephone jacks to work. Contact your cable/VoIP service provider for more 

information.

•
•

Plug the battery connector securely 
into the socket inside the handset 
battery compartment, matching the 
orientation of the engraved label.

1.

Place the battery with the label  

THIS SIDE UP

 facing up and the wires 

inside the battery compartment.

2.

Align the cover flat against the 
battery compartment, then slide it 
towards the center of the handset 
until it clicks into place.

3.

Place the handset in the handset 
charger to charge. The 

CHARGE

 light 

is on when the handset is charging.

4.

CHARGE

 light 

remains on when 
charging.

Install the battery as shown below.

Summary of Contents for DS6642-4






































































































Reviews:

No comments