manualshive.com logo in svg

VTech DS6642-4, User Manual, Page: 6 / 101

Share
Download
VTech DS6642-4 User Manual Download Page 6

Getting started

2

Telephone base and handset charger installation

Install the telephone base and handset chargers as shown below.

Make sure that the electrical outlet is not controlled by a wall switch.

If you subscribe to digital subscriber line (DSL) high-speed Internet service through 
your telephone line, you must install a DSL filter between the telephone line cord and 
the telephone wall jack. The filter prevents noise and caller ID problems caused by 
DSL interference. Contact your DSL service provider for more information about  
DSL filters.

Telephone 

line cord

If you have DSL  

high-speed Internet 

service, a DSL filter 

(not included) is 

required.
The DSL filter must 

be plugged into the 

telephone wall jack.

Telephone base 

power adapter

Telephone base

Handset charger

Electrical outlet not 

controlled by a wall 

switch

Charger 

adapter

Telephone 

wall jack

This telephone provides minimal functionality during a power outage. When the AC 
power is not available, many telephone features do not function. The telephone uses 
power from the telephone line to enable you to make and answer calls using only 
the corded handset and dialing keys. However, when another telephone on the same 
line is being used simultaneously, there might not be sufficient power to use your 
telephone in the event of a power failure.
Even if you do not subscribe to any conventional telephone service, you can still use 
the cell line alone without plugging in a telephone line cord.

CAUTION: 

If you subscribe to telephone service from a cable company or a VoIP service provider, contact 

your cable/VoIP service provider for more information.

•

•

Summary of Contents for DS6642-4






































































































Reviews:

No comments