8
8
hOW TO PlaY
Press the
On/Off Button
to turn the unit
ON
.
Drawing on Paper:
In any of the Connect the Dots drawing activities, put a piece of blank
paper on the
Light Up Dots Area & White Board surface
to draw. It
is not necessary to slide the paper into the unit.
Blank sheets of paper should be 210 x 148 mm (8.3 x 5.8 inches), the
size of an A5 piece of paper (or half the size of A4). Do not fold the
paper before placing it on the
Light Up Dots Area & White Board
surface
, as the light up dots cannot be seen clearly if the paper is too
thick or creased. To be environmentally friendly, we recommend using
recycled paper.
The
Paper Lock
will help keep the paper secure. To open the
Paper
Lock
, use your finger to push on the top of the clip. To close it, push
the clip down.
Drawing on the White Board surface:
Use a dry-erase marker or water-based marker (each sold separately)
to draw on the
White Board surface
.
To clean the
White Board surface
, wipe with a slightly damp cloth to
remove the drawing or any dirt.
Note:
Not all dry-erase markers can be cleaned off thoroughly. Every time
you use a new marker, draw a small line in the corner of the board to
see if it can be erased easily.
Do not use oil-based markers or the included crayons to draw on the
White Board surface
, as they cannot be erased thoroughly.
storage Compartment and stencil:
At the back of the unit, there is a
storage Compartment
for storing the
colouring pages and crayons. The
stencil
slides into the back of the
unit to complete the
storage Compartment
.
Summary of Contents for Digiart Colour by Lights
Page 1: ...91 003519 001 UK Parent s Guide Colour by Lights ...
Page 2: ......
