background image

2

Parts checklist

Your telephone package contains the following items. Save your sales receipt and 

original packaging in the event warranty service is necessary.

Telephone base and charger installation

Install the telephone base and charger as shown below.

Use only the power adapters and batteries supplied with this product. To order a 

replacement, visit our website at www.vtechphones.com or call  (800) 595-95.  

In Canada, go to www.vtechcanada.com or call  (800) 267-7377.

Telephone base

Charger

Electrical outlet 

(not controlled  

by a wall switch)

Telephone base 

power adapter

Telephone line cord

Telephone wall jack

Charger 

adapter

Electrical outlet 

(not controlled 

by a wall switch)

A DSL filter (not 

included) is required 

if you have DSL 

high-speed Internet 

service. 

The DSL filter must 

be plugged into the 

telephone wall jack.

Telephone 

line cord

Telephone base                     

power adapter

Handset

( for CS6629) 
(2 for CS6629-2) 
(3 for CS6629-3)  

Battery

( for CS6629) 
(2 for CS6629-2) 
(3 for CS6629-3) 

Battery compartment 

cover

( for CS6629) 
(2 for CS6629-2) 

 

(3 for CS6629-3) 

Charger and                      

charger adapter

( for CS6629-2) 
(2 for CS6629-3) 

Wall mount 

bracket

Telephone base

Abridged user’s manual

Abridged user’s manual

Quick start guide

Quick start guide

Summary of Contents for CS6529-2















Reviews: