background image

EN - 26

Make a second call

If you have an active call and intend to make a 
new call. 
Press 

Flash

 to put the active call on hold, and 

use the keypad to enter the number. Press 

Call 

soft key to place a call.

Switching between calls

If you have an active call and another call on 
hold, you can switch between the two calls.
1.  Press 

Flash

 to put the active call on hold, 

and resume the held call.

2.  To end both calls, press 

End

 or 

 

on the cordless handset or place it in the 
handset charger.

Speed dial

To dial a speed dial number:
1.  Press 

SpdDial

.

2.  Press 

 or 

 

to select a speed dial entry.

3.  Press 

OK

.

Alternatively, you can press a speed dial key  

 or 

 ), or press a speed dial soft key 

(for example, 

RmServ

).

Message waiting indicator

When a new voice message is received, 
the handset displays "

 New msg" on the 

screen. 

Play messages

1.  When the phone is idle, press 

.

The handset dials the voicemail access 
number.

2.  Follow the voice prompts to play your 

messages.

Find handset

Use this feature to find all registered cordless 
handsets.

To start paging:

Press   

/ FIND HANDSET

 on the telephone base 

when the phone is not in use. All idle cordless 
handsets beep for 60 seconds. 

To end paging:

•  Press   

/ FIND HANDSET

 again on the 

telephone base.

 

-OR-

•  Press 

 on the cordless handset.

Summary of Contents for Analog Contemporary Series










































Reviews: