VTech AM18247 User Manual Download Page 20

Page: 20 / 92

Getting started

Deskset overview

The

symbol highlights a menu item.

Answering system menu

•  Play messages
•  Mailbox On/Off
•  Record memo
•  Gen MB
•  Settings
•  Remaining time
•  Delete all old

Using menus

• Press

MENU/

SELECT

to show the main menu; or

press

ANS SYS

to show the answering system menu.

• Press or to scroll through menu items.
• Press

MENU

/SELECT

/SKIP

to select a highlighted menu item.

• Press

MENU

/SELECT

to save changes.

• Press

CANCEL

to cancel an operation, exit the menu display or return to the

idle screen.

Menus

Main menu

•  Directory
•  Call history
•  Ringer setting
•  Deskset setup
•  Speed dial
•  User support
•  Deskset info
•  Factory reset

>Directory
Call history
Ringer setting
Deskset setup

0 New message
>Play messages
Mailbox On/Off
Record memo

Summary of Contents for AM18247





























































































Search results

Summary of Contents for AM18247

Reviews:

Related manuals for AM18247

Brands by name

Popular brands

VTech AM18247, User Manual

Search results

Summary of Contents for AM18247

Reviews:

Related manuals for AM18247

Brands by name

Popular brands