OPTIONAL HEADSET INSTALLATION AND OPERATING INSTRUCTIONS
The
918 ADX is also equipped with a
detachable belt clip. Align the pins on the
inside edge of the belt clip with the notches
on the side of the
918 ADX handset. The belt
clip should snap securely into place. Do not
force the connection. See illustration.
OPERATION
NOTE: Whenever a compatible Headset
is connected to the cordless Handset, the mi-
crophone on the Handset will be MUTED.
This is done to limit the effect of background
noise.
The following operational characteristics
apply to VTech Headsets. The same may
also apply to other (non-VTech) compatible
headsets, but VTech assumes no responsibil-
ity for their performance.
The VTech brand compatible Headset has
a monaural design which is reversible, so you
can wear your Headset on either the left or
right ear, leaving one ear free for room con-
versation
The headband can be adjusted to fit the
contour of your head. Using both hands,
Your
918 ADX cordless telephone is equip-
ped with a 2.5mm Headset Jack for use with
an
optional accessory Headset for hands-
free operation
If you choose to use the Headset option,
you must do the following:
INSTALLATION
Obtain an optional accessory Headset,
which is compatible with the 918 ADX.
Please contact VTech Communications
Customer Service, toll-free at 1-800-595-
9511 for dealer information in your local area.
You can also purchase a compatible Headset
directly from VTech Communications Cus-
tomer Service.
Once you have a compatible 2.5mm Head-
set, locate the Headset Jack on the Handset
of your
918 ADX. Connect the plug on the
Headset to the jack on the cordless Handset.
The plug should fit securely. Do not force the
connection. See illustration.
HANDSET JACK&BELT
CLIP LOCATION
24
918manual.pm6
3/6/98, 3:21 PM
24
