W A L L M O U N T I N G
10
The Wall Mount adaptor is designed to fit on
standard Wall Mount plates.
Position the wall mount adaptor on the
base. Line up the tabs on the wall mount
adaptor with the holes on the bottom of
the base. Snap the wall mount adaptor
firmly in place.
Mount the base on the wall. Position
the base so the mounting studs will fit into
the holes on the bottom of the base. Po-
sition the power cord to extend down the
wall the phone is to be mounted on. Slide
the base down on the mounting studs un-
til it locks into place.
Connect the telephone cord. The tele-
phone line cord has a snap-in plug at
each end. Insert one of the plugs into the
jack on the bottom of the base. Insert the
other end of the plug into the wall jack.
Plug the AC adaptor into an electrical
outlet, and the DC connector on the
back of the Base Unit.
IMPORTANT:
When wall mouting your
918ADX , you must
reverse the handset hook, located in the
charging cradle.
Otherwise your handset may fall from the
Base Unit when cradled.
PUSH IN
and
SLIDE DOWN
9V DC
TEL.LINE
SETTING UP
YOUR
VTECH 918ADX
TELEPHONE
WALL
JACK
AC
ELECTRICAL
OUTLET
woodenstud
PULSE
INSERT WALL MOUNT
ADAPTOR ONTO THE
BASE UNIT
SNAP IN FIRMLY
RINGER
OFF
LO
HI
PULSE
T
ONE
918manual.pm6
3/6/98, 3:21 PM
10
