Enter Base ID Code
1
.
After charging the Handset, if the
screen displays SEARCHING
FOR BASE, press NEW. You will
see ENTER BASE ID. If the
screen already says ENTER
BASE ID, go to step 2.
2
.
Enter the 15 digit BASE Unit ID
Code, located on the underside
of the Base Unit.
3
.
Press OK. The Handset will
display: PLEASE WAIT!!
4
.
Wait approximately 15 seconds.
The Handset will display:
FOUND BASE
NOTE: Occasionally, it will take
longer than 15 seconds for the
Handset to find the Base
Unit.This is normal.
If the Handset displays: BASE
BUSY TRY LATER, this indicates
that the system is in use. Wait
until the Base Unit is in the idle (on
hook) mode, and repeat steps 2
to 4.
Congratulations! You can now enjoy the
benefits of your VTech multi-Handset
system.
Registration of Additional Handsets
Getting Started
