5
Enter ID Code
1.
After charging the Handset, remove
it from its Charge Cradle, the screen
will display:
2.
Press
NEW
, then enter the 15 digit
Base ID code, located on the
underside of the 2652 Base Unit.
3.
Press
OK
. The Handset will display:
PLEASE WAIT!!
4.
Wait approximately 15 seconds. The
Handset will display:
FOUND BASE
NOTE:
Occasionally, it will take
longer than 15 seconds for the
Handset to find the Base Unit. This
is normal.
If the Handset displays:
SYSTEM IS
BUSY PLEASE TRY LATER
, this
indicates that the system is in use.
Wait until the Base Unit is in the idle
(on hook) mode, and repeat steps
2 through 4.
Congratulations! You can now enjoy the
benefits of your multi-Handset system.
Registration
NO BASE
SUBSCRIPTION
91-5576-10-00.p65
11/21/2003, 3:22 PM
5