background image

2

12

.

Unplug this product from the wall outlet and contact Vtech customer

support under the following conditions:

A. When the power supply cord or plug is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally by following the operating

instructions.  Adjust only those controls that are covered by the

operating instructions, because improper adjustment of other controls

may result in damage and will often require extensive work by a VTech

authorized technician to restore the product to normal operation.

E. If the product has been dropped and the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.

13

.

Avoid using a telephone (other than a cordless type) during an electrical

storm. There may be a remote risk of electric shock from lighting.

14

.

Do not use the telephone to report a gas leak in the vicinity of the leak.

                STOP!!

If you have questions about this product, or if you're having

difficulty with setup or operation, do not return your phone

to the store. Call our Customer Support Center at:

                     1-800-595-9511

In Canada, call

                     1-800-267-7377

Summary of Contents for 2431 - VT Cordless Phone





































































Reviews: