www.vtechphones.com
9
B
as
ic
o
pe
ra
tio
n
Handset features
(
/
DIR VOL+
)
• When the phone is not in use, press
to display directory entries .
• Press & hold for 2 seconds during
idle mode to adjust ringer volume .
A double beep will sound when the
lowest setting is reached .
• During a call, press to increase
listening volume . A double beep will
sound when the highest setting is
reached .
TALK
• Press this button before dialing the number
to make a call .
-OR-
Dial the number (use to backspace and
correct digits), then press this button to
make a call .
• Press any key except
OFF
,
CID/VOL
-,
DIR/VOL+
to answer a call .
• While on a call, when there is a call waiting
alert, press this button to take the new call,
then press this button again to return to the
original call .
• When the phone is in use, this button will
glow steadily . When a call is on hold, it will
flash.
OFF
• During a call, press to hang up .
• While the handset is ringing, press
to silence the ringer .
• Press and hold for two seconds
while in idle mode to erase the
MISSED
CALLS
display .
• During programming, press to exit
without making changes .
(CID/VOL-)
• When the phone is not in use, press to
display caller ID information .
• Press and hold for two seconds while in idle
mode to adjust ringer volume . A double beep
will sound at the lowest setting .
• During a call, press to lower listening vol-
ume . A double beep will sound at the lowest
setting .
SELECT
• Press to store a programming op-
tion, or to store a directory entry .
PROG
• Press to enter programming mode while
the handset is idle (off) .
REDIAL/PAUSE
• Press
TALK
, then press this button
to call the last number dialed .
-OR-
Press this button, then press
TALK
to call the last number dialed .
• While handset is not in use, press
this button twice to delete the last
number dialed from this telephone .
• While dialing or entering numbers
into the directory, press to insert a
four-second dialing pause .
CHAN/REMOVE
• Switch to a clear channel while on a call .
• While handset is not in use, press and hold
to delete all records in the call log .
When viewing the call log, press to delete
the current record .
