VTech 15950 User Manual Download Page 96

Page: 96 / 128

To join a call:

Press

to join the call.

Press

or place the handset in the telephone

base or charger to exit the call.

INTERCOM

Use the intercom feature for conversations between
two system devices. This feature is only applicable to
models with more than one handset.

Press

INT.

when idle.

-OR-

Press

MeNU

, press

to scroll to

Intercom

, the

press

SeLeCT

If your system has more than two handsets,
press

to scroll to the destination handset

or use the dialing keys to enter the destination
device number, and then press

SeLeCT

Your handset displays

Calling other handset

, or

Calling all handsets

if you choose

All handsets

The destination handset displays

Other handset is

calling

VTeCH x is calling

. The destination device

rings.
To answer the intercom call, press

, or any

dialing key on the destination handset.
To end the intercom call on either handset, press

eND

on the handset or place the handset

back in the telephone base or charger.

•
•

•

Summary of Contents for 15950

































































































































Search results

Summary of Contents for 15950

Reviews:

Related manuals for 15950

Brands by name

Popular brands

VTech 15950, User Manual

Search results

Summary of Contents for 15950

Reviews:

Related manuals for 15950

Brands by name

Popular brands