VTech 15450 Page 56 User Manual Download

Page: 56 / 88

The answering system can record and store messages.
The actual recording time depends on individual
message characteristics. Messages remain available
for replay until you delete them.

ANNOUNCEMENT

The telephone is preset with a greeting that answers
calls with, “

Hello. Please leave a message after the

tone

.” You can use this preset announcement, or replace

it with your own.

RECORD YOUR OwN ANNOUNCEMENT

You can record an announcement up to 90 seconds, but
any announcement shorter than two seconds will not be
recorded.

To record an announcement with a handset:

Press

when idle.

Press

or to scroll to

Answering sys

, then press

Press

again to select

Announcement

1.
.

ANswERING MACHINE

Note:

Your answering machine will answer calls after

13 rings, even when it is turned off. This allows the
remote access feature to work.

Summary of Contents for 15450

























































































Search results

Summary of Contents for 15450

Reviews:

Related manuals for 15450

Brands by name

Popular brands

VTech 15450, User Manual

Search results

Summary of Contents for 15450

Reviews:

Related manuals for 15450

Brands by name

Popular brands