4
BATTERY INSTALLATION
1.
Make sure the unit is turned
OFF
.
2.
Locate the battery cover on the bottom of the unit. Use
a screwdriver to loosen the screw.
3.
Install 2 new AAA (AM-4/LR03) batteries following
the diagram inside the battery box. (The use of new
alkaline batteries is recommended for maximum
performance.)
4.
Replace the battery cover and tighten the screw to
secure.
BATTERY NOTICE
•
Use new alkaline batteries for maximum performance.
•
Use only batteries of the same or equivalent type as recommended.
•
Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
•
Do not use damaged batteries.
•
Insert batteries with the correct polarity.
•
Do not short-circuit the battery terminals.
•
Remove exhausted batteries from the toy.
•
Remove batteries during long periods of non-use.
•
Do not dispose of batteries in fire.
•
Do not charge non-rechargeable batteries.
•
Remove rechargeable batteries from the toy before charging (if removable).
•
Rechargeable batteries are only to be charged under adult supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or
on their respective packaging, indicates they must not be disposed
of in domestic waste as they contain substances that can be
damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that
the battery contains more than the specified value of mercury (Hg),
cadmium (Cd) or lead (Pb) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market
after 13th August, 2005.
Help protect the environment by disposing of your product or
Batter
y Information
