- 5 -
Quick Installation Guide
•
If your motorcycle is a traditional carburetor system please try to change a suitable R-value ignition plug
when you meet the interference phenomenon.
ATTENTION
•
Please do NOT flush the main unit, lenses, power module, and remote with the high-pressure water gun.
•
Do not bend the cable nor twist the connector during installation.
•
The position of the main unit and lens cable should be away from the high-voltage circuit like xenon lamp,
ignition plug etc.
Front Cam
Main
Unit
Wired Controller
Power Module
Rear Cam
Parking monitoring
Set parking mode On
/
Off
Set the vibration sensitivity when parking
Video clip time
Set the loop record clip time
Sound record
On
/
Off
MIC sensitivity
Set the sound level of mic
LCD Power Save
Set LCD backlight to stay on or turn off after
1 minute/3 minutes
Date format
YYYY MM DD/MM DD YYYY/DD MM YYYY
Clock settings
Set date & time
R-Cam Mirror
Set the rear cam mirror function On/Off
Protect Level
G-sensor adjustment
Format SD card
Delete all videos from the memory card
WiFi mode
On/Off
Reset setup
Reset your device to factory settings
FW version
Check the firmware version
Movie Off Time
Set recording time after flame out
Parking sensitivity
Time zone select
Time zone selection around the world
Speed Stamp
when playback videos on the PC/APP
Turn on/off the speed watermark
Display the current number of satellites,
longitude, latitude and other information
Unit system
Metric units/Imperial units
GPS Status
Wired Controller
GPS Module
Menu Setting Description
Tire pressure unit
bar
/
PSI
TPMS alarm sound On/Off
TPMS Threshold
Set the value of the max and min tire
pressure alarm
Beep
On/Off
Voice guide
On/Off
