THE HOME CUT / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
MAINS OPERATION
- A plastic cover has been placed over the plug to protect it from damage.
Remove the plastic cover before inserting into suitable power outlet. Ensure
your new clipper is switched off before plugging into a power outlet.
- Plug your new clipper into a suitable power outlet and switch the product on
by sliding the on/off switch to the ‘on’ position.
ADJUSTING THE POWER SCREW
The power screw allows you to adjust the power of your clipper.
To adjust the power screw - take a screwdriver or coin - turn the power
Screw counter clockwise until the arm strikes the
coil, making a clacking noise (Fig.1).
Then, turn the screw clockwise, until the noise stops and then turn
about 45 degrees more. This is the maximum power setting (Fig.2).
Fig. 4
Fig. 3
Fig. 5
Fig. 4
Fig. 3
Fig. 5
Fig.1
Fig.2
