THE HOME CUT / TOOL TIPS
10
2. To realign the blades, simply match them up, point to point. The top edge of
the large blade should be 0.5mm to 1.2mm higher than the top edge of the
small blade (see Fig.4). This is important so that the clipper does not cut too
close, or come into contact with the skin.
3. The extreme left-hand tooth of the large blade must cover or be to the
extreme left hand of the first small tooth on the small blade. Be sure that the
extreme right-hand tooth of the large blade touches the extreme right-hand
tooth of the small blade.
4. To re-attach the blades to the clipper head, simply slide the small blade
on to the white oscillating head, making sure that the small blade and large
blade are still properly aligned. Line up the large blade with the two screw
holes. Place the original screws, one in each hole and lightly tighten with a
Philips head screwdriver until secure.
5. The clipper is now suitable for use.
Fig. 4
Cutting Comb (large blade
Cutter
(small blade)
0.5mm to 1.2mm
