THE MULTI GROOMER / TOOL TIPS
7
PREPPING YOUR
NEW TOOL
CHARGING
The Multi Groomer is so easy to use. But before you start using your new tool,
you must take the time to charge it overnight for
16 hours
before its first use.
Your new tool comes with a small amount of charge, but the initial charge will
ensure your new tool will have optimum power performance to give you smooth
fast cutting, every time.
- Before using for the first time, fully charge your new tool continuously for
16 hours.
- Maximum battery capacity will only be reached after 3 charging &
discharging cycles.
The Multi Groomer can be charged whilst standing in the charging/storage stand
or without the stand.
To charge the trimmer whilst in the stand, remove the trimmer and accessories
from the stand. Insert the small plug on the charging adaptor into the hole on
the base of the stand and push firmly into position. Route the cord through the
channel on the base of the stand and secure in place. Plug the charging adaptor
into a suitable mains power socket and switch on. Ensuring your new tool is
switched off, assemble the trimmer into the stand and push the trimmer down
onto the small plug to commence charging.
To charge the trimmer without the stand, simply insert the small plug on the
charging adaptor into the hole on the base of the trimmer.
- The red charging LED indicator light on your new tool will remain on when
correctly connected to the mains power.
- A full charge will supply 30 minutes cordless runtime.
- To maintain optimum capacity of the rechargeable battery, it is highly
recommended to fully discharge & then recharge your tool for 16 hours every
3 months.
